Sample Articles One

　　As a convenient means of transportation, motorcycle is loved by many people. However, the daily use of motorcycles will inevitably encounter some failures and problems. This article will answer 10 questions about the common faults and maintenance of motorcycles, and hope to help you.

　　Question 1: How to start the motorcycle?

　　A: The difficulty of starting the motorcycle may be caused by carbon accumulation in the spark plug, blockage of the carburetor, and insufficient battery power. First check whether the spark plug is seriously carbon deposited, if so, the need to clean or replace the spark plug. Then check whether the carburetor is blocked, if there is a blockage, you need to clean the carburetor. Finally check whether the battery is sufficient, if the power is insufficient, you need to charge or replace the battery.

　　Question 2: What should I do if my motorcycle's fuel consumption is too high?

　　A: Motorcycle fuel consumption is too high for many reasons, such as tire pressure is too low, engine wear is serious, carburetor adjustment is not proper. First check whether the tire pressure is normal, if the pressure is too low, it needs to be inflated to the standard value. Secondly, check whether the engine has serious wear phenomenon, if there is serious wear, it is necessary to repair or replace the relevant parts in time. Finally check whether the carburetor is properly adjusted, if there is a problem need to adjust the carburetor.

　　Question 3: What should I do if there is abnormal noise in the motorcycle?

　　A: The abnormal sound in the motorcycle may be caused by loose chain, bearing damage, shock absorber oil leakage and other reasons. First check whether the chain is loose, if loose need to adjust the chain tightness. Secondly, check whether the bearing is damaged, and replace the bearing if there is damage. Finally check whether the shock absorber leaks oil. If there is oil leakage, replace the shock absorber oil seal or shock absorber assembly.

　　Question 4: What should I do if the motorcycle brakes fail?

　　A: Motorcycle brake failure may be caused by serious wear of brake pads, insufficient brake oil, brake line rust and other reasons. First check whether the brake pads are seriously worn, if the wear is serious, the brake pads need to be replaced. Then check whether the brake oil is sufficient, if insufficient need to add brake oil. Finally, check whether the brake line is rusty. If there is rust, clean the rust and apply lubricating oil.

　　Q5: What should I do if my motorcycle headlights don't work?

　　A: The motorcycle headlights may not be bright due to the bulb burned out, line failure, switch damage and other reasons. First check whether the bulb is burned out, if burned out need to replace the bulb. Secondly, check whether there is a fault in the line, and repair the line if there is a fault. Finally check whether the switch is damaged. If it is damaged, replace the switch.

　　Question 6: What if the motorcycle engine overheats?

　　A: Motorcycle engine overheating may be caused by insufficient coolant, fan failure, internal wear of the engine and other reasons. First check whether the coolant is sufficient, if insufficient need to add coolant. Then check whether the fan works properly. If any fault occurs, repair or replace the fan. Finally, check whether there is serious wear inside the engine, if there is serious wear, it is necessary to timely repair or replace the relevant parts.

　　Q7: What if there is black smoke from the exhaust pipe of the motorcycle?

　　A: The black smoke from the motorcycle exhaust pipe may be caused by too much mixture, too early ignition time, piston ring wear and other reasons. First check whether the mixture is too thick, if too thick need to adjust the carburetor. Secondly, check whether the ignition time is too early, and adjust the ignition timing if it is too early. Finally check whether the piston ring is seriously worn, if there is serious wear, it is necessary to timely repair or replace the relevant parts.

　　Question 8: What should I do if the motorcycle clutch slips?

　　A: The motorcycle clutch slip may be caused by serious wear of the friction plate, insufficient spring elasticity of the clutch, and improper adjustment of the clutch pull line. First check whether the friction plate is seriously worn. If the wear is serious, replace the friction plate. Secondly, check whether the clutch spring is not elastic enough, if insufficient need to replace the clutch spring. Finally check whether the clutch pull line is properly adjusted, if there is improper need to readjust the clutch pull line.

　　Question 9: What should I do if the motorcycle shock absorber leaks oil?

　　A: The oil leakage of the motorcycle shock absorber may be caused by aging of the oil seal, internal damage of the shock absorber and other reasons. First check whether the oil seal is aging, if aging need to replace the oil seal. Secondly, check whether there is damage inside the shock absorber. If there is damage, the shock absorber assembly needs to be replaced.

　　Question 10: What should I do if the motorcycle chain is loose?

　　A: Motorcycle chain slack may be caused by serious wear of the chain link, sprocket wear and other reasons. First check whether the chain link is seriously worn, if it is seriously worn, the chain needs to be replaced. Secondly, check whether the sprocket is seriously worn, if there is serious wear, it is necessary to repair or replace the relevant parts in time.

　　In short, the motorcycle will inevitably encounter some problems in the process of use, but as long as the correct maintenance methods and troubleshooting methods can ensure the good performance and service life of the motorcycle. I hope you can read the answers to the above 10 questions carefully and apply them to real life to solve the problems you encounter.